PRODUCTS & SERVICES

MB16 Series Coal-Water Slurry Additives

MB16

High-concentration slurry

MB16 Series Coal-Water Slurry Additives

For coal with strong slurry-forming potential, optimizing viscosity, flowability and stability together at the target concentration.

Compare models

MB16-A

High concentration, low viscosity

For coal with favorable slurry-forming potential, assessing viscosity growth, flowability and pumping suitability at higher concentrations.

Applications

High-calorific-value Heishan coal with favorable slurry-forming potential
Conditions requiring further increases in slurry concentration

Evaluation focus

Maximum achievable slurry concentration
Viscosity at high concentration
Flowability
Pumping suitability

Combination guidance

May be evaluated in combination with WJ01.

MB16-B

High-concentration stability

For concentrated coal-water slurry, balancing rheology, static stability and overall compatibility.

Applications

High-concentration coal-water slurry
Conditions requiring a balance of concentration and stability

Evaluation focus

Concentration
Apparent viscosity and flowability
Static stability
Overall compatibility

Combination guidance

Evaluate stability with WJ01 and compare other main additives where necessary.

Application guidance

High-calorific-value Heishan coal and coal with favorable slurry-forming potential.
Slurry preparation requiring high concentration, low viscosity or stability.
Regional context: the typical Heishan coal-sample research range is approximately 58%–68%. This is research context, not an MB16 performance guarantee.

Performance evaluation

Viscosity growth and flowability across concentration gradients
Static stability, pumping suitability and continuous slurry preparation

Combination guidance

Compare MB16-A / MB16-B according to low-viscosity or stability targets.
Introduce WJ01 for stability evaluation where needed.

Validation from coal sample to plant

01
Confirm the potential for a further concentration increase.
02
Observe viscosity and flowability at higher concentration gradients.
03
Compare MB16-A / MB16-B against viscosity or stability targets.
04
Evaluate WJ01 combinations and overall performance where needed.
05
Validate continuous slurry preparation and the operating window at pilot scale.

These directions support preliminary selection only. Final formulations depend on coal-sample testing and field validation. Coal properties, process water, particle-size distribution, target concentration and plant conditions must be considered together. This page does not promise fixed performance or dosage.

Discuss your coal and slurry targets

Discuss series selection All products & services